| Parameters | Units | About | Contact | |||||||||
| + | 2 reference(s) hidden. |
| Emerson Process Management | Rosemount 5400 Series | 0203 | Transducer | |
| Rosemount 5600 TankRadar PRO | 0103 | Transducer |
| Description: | Still Pipe Diameter |
| Unit: | RADAR_LEVEL_RANGE.UNITS_INDEX |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Enter the pipe inner diameter if the antenna is mounted in a still pipe application. |
| + | 1 reference(s) hidden. |
| Emerson Process Management | Rosemount 5600 TankRadar PRO | 0201 | Transducer |
| Description: | Still Pipe Diameter |
| Unit: | RADAR_LEVEL_RANGE.UNITS_INDEX |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Enter the inner pipe diameter for the pipe or bypass well in which the antenna is mounted. This option is only available for pipe antennas and User Defined antennas.The Pipe Inner Diameter is used to compensate for the lower microwave propagation speed inside the pipe. An incorrect value will give a scale factor error.Note: If you have a User Defined antenna which is not mounted in a still pipe or bypass well make sure the Pipe Inner Diameter is set to a value less than or equal to zero (<=0). A value less than or equal to zero means that no correction for pipe is made. |