| Parameters | Units | About | Contact | |||||||||
| + | 20 like(s) hidden. |
| + | 2 reference(s) hidden. |
| KOSO America Inc. | Xpac X2 Model Series | 0101 | XPAC | Transducer |
| 0201 | XPAC | Transducer |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| + | 1 reference(s) hidden. |
| Emerson Process Management | El-O-Matic DD30 | 0401 | Transducer |
| Minimum Range: | 0 |
| Maximum Range: | 100 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Defines the maximum error required between setpoint and the position before the actuator will move to compensate |
| + | 1 reference(s) hidden. |
| Flowserve Corporation | PMV D3 | 0101 | Analog Output | Transducer |
| Minimum Range: | 0.2 |
| Maximum Range: | 20 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Deadband in percent of travel span. Travel span corresponds to the Output Signal Range (Upper Value and Lower Value). |
| + | 1 reference(s) hidden. |
| Magnetrol | Orion Jupiter Model 2xx | 0101 | Analog Input | Transducer |
| Unit: | SENSOR_UNIT |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Distance from transducer to first detectable level in sensor units. Operation when the liquid level is within the Deadband is undefined. |
| + | 1 reference(s) hidden. |
| Rotork Controls Ltd | FF01 Mk2 Network Interface | 0102 | Transducer |
| Minimum Range: | 0 |
| Maximum Range: | 25.5 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Actuator deadband value. |
| + | 1 reference(s) hidden. |
| Siemens AG | SIPART PS2 FF | 0101 | Analog Output | Transducer |
| Description: | Dead zone of controller (DEBA) |
| Minimum Range: | -120 |
| Maximum Range: | 10 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | The dead zone can be entered as a percentage of the way in this parameter.The way corresponds to the output signal range (start value and end value). The dead zone is constantly adapted to the requirements of the control circuit in the 'AUTO' mode (value = -120). The initial value is used. |
| + | 1 reference(s) hidden. |
| Foxboro-Eckardt | 240FF | 0101 | Pressure | Transducer |
| Description: | Value |
| Parent: | SMART_SMOOTH |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | A numerical quantity entered by a user or calculated by the algorithm. |
| + | 1 reference(s) hidden. |
| ABB Automation Products GmbH | TZID-C120/220 | 0101 | Transducer |
| Parent: | TOLERANCE_DEAD_BAND |
| Minimum Range: | -327.68 |
| Maximum Range: | 327.67 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |