Foundation Fieldbus Parameter Search (βeta)

"Taking the frustration out of foundation"

Parameters Units About Contact
 
Parameter:
+16 like(s) hidden.
ACT_DEVICE_STATUS DEVICE_STATUS1 DEVICE_STATUS2 DEVICE_STATUS3 DEVICE_STATUS4 DEVICE_STATUS5 DEVICE_STATUS_1 DEVICE_STATUS_2 DEVICE_STATUS_3 DEVICE_STATUS_4 DEVICE_STATUS_5 DEVICE_STATUS_6 DEVICE_STATUS_7 DEVICE_STATUS_8 DEVICE_STATUS_INIT TB_ACT_DEVICE_STATUS

+5 reference(s) hidden.
VEGA Grieshaber KGVEGABAR0301Analog InputTransducer
VEGACAL0301Analog InputTransducer
VEGADIF0401Analog InputTransducer
VEGAFLEX0301Analog InputTransducer
WIKA Alexander Wiegand SE & Co. KG.IPT-1x-40301Analog InputTransducer
Category:Vendor
Access:View Only
Type:Enumeration
Enumerations:0 – OK
13 – non-specific error
17 – Cal span too small
34 – EEPROM memory fault
36 – ROM memory fault
37 – RAM memory fault
40 – non-specific hardware fault
41 – Sensor element not found
42 – No leaking pulse
43 – No trigger signal
44 – EMI error
113 – Communication hardware fault

+3 reference(s) hidden.
Yamatake CorporationDSTJ 3000 NewAce0103DST DiagnosticsFunction
0104DST DiagnosticsFunction
SVP3000 AVP203/AVP3030101AVP DiagnosticFunction
Size:4
Category:Vendor
Access:View Only
Type:bit Array
Help:device self-diagnosis status
Enumerations:0 – ROM_ERR
1 – RAM_ERR
2 – NVM_ALM
3 – I/O_ERR

+2 reference(s) hidden.
MagnetrolEclipse Enhanced Model 705 3x0201Analog InputTransducer
Orion Jupiter Model 2xx0101Analog InputTransducer
Description:Device Status
Size:4
Category:Vendor
Access:View Only
Type:bit Array
Help:Device Status information is bit encoded. If no faults or warnings are present, the OK status bit is set.
Enumerations:0 – System Warning
1 – Weak Signal
2 – Dry Probe
3 – May Be Flooded
4 – Initializing
5 – Factory Access
6 – No Steam Target
7 – User Access
8 – EOP Too Low
9 – Default Cal
10 – Lo Temperature
11 – Hi Temperature
12 – Warning 2
13 – Fiducial Spread
14 – Seal Leak
15 – OK
16 – Hi Volume Flt
17 – EOP High
18 – EOP < Probe Length
19 – No Signal
20 – Safety Zone Flt
21 – No Fiducial
22 – No Probe
23 – Lvl < Probe Length
24 – Slope Error
25 – Fiducial Shift
26 – Fault 3
27 – No End of Ramp
28 – Default Params
29 – EEPROM Failure
30 – CPU Failure
31 – Software Failure

+2 reference(s) hidden.
Fieldbus InternationalLevel Radar Device0101Transducer
Level TDR Device0101Transducer
Parent:FINT_FACTORY
Size:2
Category:Vendor
Access:View Only
Type:bit Array
Help:Status of the FF HART Gateway
Enumerations:0 – Internal Communication Failure
1 – Hart Communication Failure

+1 reference(s) hidden.
VEGA Grieshaber KGVEGASON0301Analog InputTransducer
Category:Vendor
Access:View Only
Type:Enumeration
Help:Possible types of linearization are: linear, user defined, cylindrical lying container, spherical container
Enumerations:0 – OK
13 – non-specific error
17 – Cal span too small
34 – EEPROM memory fault
36 – ROM memory fault
37 – RAM memory fault
40 – non-specific hardware fault
41 – Sensor element not found
42 – No leaking pulse
43 – No trigger signal
44 – EMI error
113 – Communication hardware fault

+1 reference(s) hidden.
Siemens AGSITRANS P DSIII/P300 FF0101Resource
Description:Device Status
Parent:HART_COMMAND
Category:Vendor
Access:Engineer
Type:8 bit Unsigned Integer
Help:The HART device status