| Parameters | Units | About | Contact | |||||||||
| + | 1 reference(s) hidden. |
| Endress+Hauser | PROline Promass 83 | 0202 | Coriolis | Transducer |
| Description: | Diagnosis - Previous System Condition |
| Category: | Vendor |
| Access: | View Only |
| Type: | Enumeration |
| Help: | No Help Available |
| Enumerations: | 0 – System O.K. - Err.No. 000 1 – Critical Failure - Err.No. 001 11 – Amplifier EEPROM failure - Err.No. 011 12 – Amplifier EEPROM data inconsistent - Err.No. 012 31 – S- DAT failure / not inserted - Err.No. 031 32 – S- DAT data inconsistent - Err.No. 032 41 – T- DAT failure - Err.No. 041 42 – T- DAT data inconsistent - Err.No. 042 51 – Compatibility AMP-I/O Modul - Err.No. 051 61 – F-Chip failure - Err.No. 061 111 – Totalizer checksum error - Err.No. 111 121 – Compatibility AMP-I/O Modul - Err.No. 121 205 – Save to T- DAT failed - Err.No. 205 206 – Restore from T- DAT failed - Err.No. 206 261 – Communication failure - Err.No. 261 379 – Measuring tube is outside the range - Err.No. 379 380 – Measuring tube is outside the range - Err.No. 380 381 – Tube temperatur sensor defect - Err.No. 381 382 – Tube temperatur sensor defect - Err.No. 382 383 – Carrier tube sensor defect - Err.No. 383 384 – Carrier tube sensor defect - Err.No. 384 385 – Measuring exiter coil defect - Err.No. 385 386 – Measuring exiter coil defect - Err.No. 386 388 – Amplifier error - Err.No. 388 389 – Amplifier error - Err.No. 389 390 – Amplifier error - Err.No. 390 397 – Measuring exiter coil defect - Err.No. 387 501 – New amplifier software loaded - Err.No. 501 586 – No fluid continuation - Err.No. 586 587 – Extreme process conditions - Err.No. 587 588 – Overdriving of the analog/digital converter - Err.No. 588 601 – Positive Zero Return active - Err.No. 601 691 – Simulation of response to error - Err.No. 691 692 – Simulation of measuring active - Err.No. 692 700 – Empty pipe detected - Err.No. 700 701 – Current of the measuring tube to high - Err.No. 701 702 – Frequency control not stable due the process fluid - Err.No. 702 703 – Overdriving of the control level - Err.No. 703 704 – Overdriving of the control level - Err.No. 704 705 – Massflow too high - Err.No. 705 731 – Zero point adjustment is not possible - Err.No. 731 |