| Parameters | Units | About | Contact | |||||||||
| + | 1 reference(s) hidden. |
| Emerson Process Management | Rosemount 5300 Series | 0107 | Transducer |
| Description: | Device mode |
| Category: | Vendor |
| Access: | Engineer |
| Type: | Enumeration |
| Help: | Device mode |
| Enumerations: | 0 – Normal operation 1 – Spare 2 – Restart device 3 – Set to factory default 4 – Trim near zone |
| + | 1 reference(s) hidden. |
| Emerson Process Management | Rosemount 5400 Series | 0203 | Transducer |
| Description: | Service |
| Category: | Vendor |
| Access: | Engineer |
| Type: | Enumeration |
| Help: | 1. Normal FF communication.2. Spare.3. Restart. The device main board is restarted, not the Fieldbus communication card.4. Set to Factory Default. Set database parameters on the main board to factory defaults. |
| Enumerations: | 0 – Normal FF communication 1 – Spare 2 – Restart 3 – Set to Factory Default |
| + | 1 reference(s) hidden. |
| Emerson Process Management | Rosemount 5600 TankRadar PRO | 0103 | Transducer |
| Description: | Service |
| Category: | Vendor |
| Access: | Engineer |
| Type: | Enumeration |
| Help: | 1. FF Bus. Normal FF communication.2. Sensor Bus. Used for advanced configuration and service through the sensor bus with PC software.3. Restart. Restarts the gauge only, not the Fieldbus communication card.4. Set to Factory Default. Set database parameters to factory defaults. |
| Enumerations: | 0 – FF bus 1 – Sensorbus 2 – Restart device 3 – Set to Factory Defaults |
| + | 1 reference(s) hidden. |
| Emerson Process Management | Rosemount 5600 TankRadar PRO | 0201 | Transducer |
| Description: | Service Mode |
| Category: | Vendor |
| Access: | Engineer |
| Type: | Enumeration |
| Help: | 1. FF Bus. Normal FF communication.2. Sensor Bus. Used for advanced configuration and service through the sensor bus with PC software.3. Restart. Restarts the gauge only, not the Fieldbus communication card. |
| Enumerations: | 0 – FF bus 1 – Sensorbus 2 – Restart device |