| Parameters | Units | About | Contact | |||||||||
| + | 2 reference(s) hidden. |
| Emerson Process Management | Rosemount 5400 Series | 0203 | Transducer | |
| Rosemount 5600 TankRadar PRO | 0103 | Transducer |
| Description: | Process Condition |
| Size: | 4 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | bit Array |
| Help: | To describe the process condition, mark the check boxes that correspond to the conditions in your tank: 1. Rapid level changes. Optimizes the transmitter for measurement conditions where the level changes quickly due to filling and emptying of the tank.2. Turbulent Surface. This parameter may be used if the tank e.g. contains boiling products causing a turbulent surface. By setting this parameter the performance of the transmitter will be improved when there are small and quickly changing amplitudes and levels.3. Foam. Setting this parameter optimizes the transmitter for conditions with weak and varying surface echo amplitudes.4. Solid Products. Solid materials such as cement, grains, pellets, etc. For best performance you should not choose more than two options. |
| Enumerations: | 27 – Solid Product 28 – Foam 29 – Turbulent Surface 30 – Reserved 31 – Rapid Changes |
| + | 1 reference(s) hidden. |
| Emerson Process Management | Rosemount 5300 Series | 0107 | Transducer |
| Description: | Process Condition |
| Size: | 4 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | bit Array |
| Help: | Enable checkboxes depending on environment in the tank. Note: For best performance, choose only if applicable and not more than two options. |
| Enumerations: | 3 – Rapid Changes |
| + | 1 reference(s) hidden. |
| Emerson Process Management | Rosemount 5600 TankRadar PRO | 0201 | Transducer |
| Description: | Process Condition |
| Size: | 4 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | bit Array |
| Help: | To describe the Process Condition, mark the check boxes that correspond to the conditions in your tank. For best performance you should not choose more than two options.Rapid level changes - Optimizes the transmitter for measurement conditions where the level changes quickly due to filling and emptying of the tank.Turbulent Surface - This parameter may be used if the tank e.g. contains boiling products causing a turbulent surface. By setting this parameter the performance of the transmitter will be improved when there are small and quickly changing amplitudes and levels.Foam - Setting this parameter optimizes the transmitter for conditions with weak and varying surface echo amplitudes.Solid Products - Solid materials such as cement, grains, pellets, etc. |
| Enumerations: | 26 – Solid Product 27 – Foam 28 – Turbulent Surface 30 – Rapid Changes |