| Parameters | Units | About | Contact | |||||||||
| + | 2 reference(s) hidden. |
| Flowserve Corporation | LOGIX 3400IQ/1400 | 0501 | Flowserve Valve Positioner | Transducer |
| Logix 3400MD | 0102 | Main | Transducer |
| Description: | Final Pos'n High Cutoff |
| Minimum Range: | FINAL_VALUE_RANGE.EU_0 |
| Maximum Range: | FINAL_VALUE_RANGE.EU_100 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | If FINAL_VALUE (positioner's set point) goes above this value the positioner will drive the valve open. FINAL_VALUE must be less than FINAL_VALUE_CUTOFF_HI by more than 1% before the positioner will start to close the valve. |
| + | 2 reference(s) hidden. |
| Metso Automation | ND9000F | 0301 | Transducer | |
| 0401 | Transducer |
| Description: | Final Pos'n High Cutoff |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | If the FINAL_VALUE is more positive than this value, the valve is forced to its maximum high value (calibrated 100 %). |
| + | 1 reference(s) hidden. |
| Emerson Process Management | Fisher DVC6200f / DVC6000f | 0203 | Transducer |
| Description: | Final Pos'n High Cutoff |
| Minimum Range: | FINAL_VALUE_RANGE.EU_0 |
| Maximum Range: | FINAL_VALUE_RANGE.EU_100 |
| Category: | Standard |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Travel Cutoff Hi defines the high cutoff point for the travel in percent (%) of pre-characterized setpoint. Above this cutoff, the travel target is set to 123%. Travel Cutoff Hi is deactivated by setting it to 125.0%. |
| + | 1 reference(s) hidden. |
| SAMSON AG | 373x-5 | 0201 | Advanced PV | Transducer |
| Description: | Final Pos'n High Cutoff |
| Unit: | FINAL_VALUE_RANGE.UNITS_INDEX |
| Minimum Range: | FINAL_VALUE_RANGE.EU_0 |
| Maximum Range: | FINAL_VALUE_RANGE.EU_100 |
| Category: | Standard |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | If the FINAL_VALUE is more positive than this value, the value is forced to its maximum high value (fully opened). |
| + | 1 reference(s) hidden. |
| Yamatake Corporation | SVP3000 AVP203/AVP303 | 0101 | AVP Analog Output | Transducer |
| Description: | Final Pos'n High Cutoff |
| Minimum Range: | FINAL_VALUE_RANGE.EU_0 |
| Maximum Range: | FINAL_VALUE_RANGE.EU_100 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | when this value exceeded,the valve id forced to its maximum high value. |