| Parameters | Units | About | Contact | |||||||||
| + | 1 reference(s) hidden. |
| Berthold Technologies GmbH & Co. KG | Uniprobe LB490/1 | 0101 | Flow | Transducer |
| Parent: | FL_INTERFERENCE_DETECTION |
| Minimum Range: | 3 |
| Maximum Range: | 10 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Enter the Sigma limit to trigger the radiation interference. The measurement stops as soon as the pulse rate of the Sigma limit value has been reached. The Sigma value should be at least 5. The higher the value, the higher the response threshold. If radiation interference is detected, the measurement stops and the measured value is halted. The measurement continues after 20s if no new radiation interference takes place. |