| Parameters | Units | About | Contact | |||||||||
| + | 2 reference(s) hidden. |
| Emerson Process Management | Rosemount 5400 Series | 0203 | Transducer | |
| Rosemount 5600 TankRadar PRO | 0103 | Transducer |
| Description: | Hold Off Distance (UNZ) |
| Unit: | RADAR_LEVEL_RANGE.UNITS_INDEX |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | The Hold Off (UNZ) distance defines how close to the transmitters reference point a level value is accepted. Normally the Hold Off distance does not need to be changed. However, if there are disturbing echoes in the upper part of the tank, for example from the tank nozzle, you can increase the Hold Off distance in order to avoid measurements in the region close to the antenna. |
| + | 1 reference(s) hidden. |
| Emerson Process Management | Rosemount 5600 TankRadar PRO | 0201 | Transducer |
| Description: | Hold Off Distance (UNZ) |
| Unit: | RADAR_LEVEL_RANGE.UNITS_INDEX |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | The Hold Off Distance (UNZ) defines how close to the transmitters reference point a level value is accepted. Normally the Hold Off Distance does not need to be changed. However, if there are disturbing echoes in the upper part of the tank, for example from the tank nozzle, you can increase the Hold Off Distance in order to avoid measurements in the region close to the antenna. If you have a User Defined antenna you need to specify the Hold Off Distance. |