| Parameters | Units | About | Contact | |||||||||
| + | 1 reference(s) hidden. |
| Berthold Technologies GmbH & Co. KG | Uniprobe LB490/1 | 0202 | Level | Transducer |
| Parent: | LE_DETECTOR_SETUP |
| Minimum Range: | 0 |
| Maximum Range: | 1300 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 16 bit Unsigned Integer |
| Help: | Write the HV default value. The HV default value also reduces the available HV range in the HV auto mode from -20% to +40% of the HV default value. This prevents the HV from deviating too far from the plateau even if the control should fail. |