| Parameters | Units | About | Contact | |||||||||
| + | 1 reference(s) hidden. |
| Berthold Technologies GmbH & Co. KG | Uniprobe LB490/1 | 0202 | Level | Transducer |
| Minimum Range: | 0 |
| Maximum Range: | 999999 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | This function is enabled only for special applications In all other cases the function is disabled by entering 0. Enter a value unequal to zero to enable the lower threshold. If the current pulse rate falls below the lower threshold, the measurement is halted until the pulse rate threshold is exceeded again. If the measurement is stopped, the measured value display and the current output are halted. The pulse rate where switching takes place is the current non-averaged pulse rate. |