| Parameters | Units | About | Contact | |||||||||
| + | 1 reference(s) hidden. |
| Berthold Technologies GmbH & Co. KG | Uniprobe LB490/1 | 0202 | Level | Transducer |
| Minimum Range: | 0 |
| Maximum Range: | 999999 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Service function: Enter a pulse rate and check if the measuring reading shows the expected value. The Test Mode is enabled if you enter a pulse rate >0. During Test Mode the failure relay indicates an alarm. ATTENTION: Reset the test pulse rate to 0 as soon as the test is over to continue in the normal measurement mode. |