| Parameters | Units | About | Contact | |||||||||
| + | 1 reference(s) hidden. |
| ABB Automation Products GmbH | 2600T Series 267/269 | 0201 | Pressure | Transducer |
| Description: | Low Cutoff |
| Minimum Range: | 0 |
| Maximum Range: | 15 |
| Category: | Vendor |
| Access: | View Only |
| Type: | 32 bit Float |
| Help: | Limit used in square root processing. A value of zero percent of scale is used in block processing if the transducer value falls below this limit, in % of scale. This feature may be used to eliminate noise near zero from a flow sensor. |
| + | 1 reference(s) hidden. |
| ABB Automation Products GmbH | FSM4000 | 0201 | Flow with Calibration | Transducer |
| Description: | Low flow cut off |
| Minimum Range: | 0 |
| Maximum Range: | 10 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Flow values below low flow cut-off are set to zero. The switch point has a built in hysteresis off 0.1 % |
| + | 1 reference(s) hidden. |
| ABB Automation Products GmbH | FXE4000 | 0202 | Flow with Calibration | Transducer |
| Description: | Low flow cut-off |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | Flow values below low flow cut-off are set to zero. |
| + | 1 reference(s) hidden. |
| VEGA Grieshaber KG | VEGADIF | 0401 | Analog Input | Transducer |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | This is the point in percent of flow till that the output of the flow function is set to zero. It is used for suppressing low flow values |