| Parameters | Units | About | Contact | |||||||||
| + | 2 reference(s) hidden. |
| Emerson Process Management | Rosemount 8800 | 0701 | Transducer | |
| 0901 | Transducer |
| Description: | LFC Setting |
| Category: | Vendor |
| Access: | Engineer |
| Type: | Enumeration |
| Help: | LFC Setting - the configured Low Flow Cutoff in Hz. The Low Flow Cutoff is used to reject low frequency noise such as pipeline vibration. This can be automatically optimized for the application by using the 'Optimize Signal Processing' feature. It can be manually adjusted up or down. However, it is not recommended to move it by more than one or two increments. |
| Enumerations: | 5 – 4160 6 – 3330 7 – 2700 8 – 2220 9 – 1820 10 – 1517 11 – 1246 12 – 1042 13 – 866 14 – 725 15 – 600 16 – 505 17 – 422 18 – 354 19 – 294 20 – 247 21 – 208 22 – 175 23 – 145 24 – 123 25 – 103 26 – 87.2 27 – 72.6 28 – 61.2 29 – 51.5 30 – 43.5 31 – 36.2 32 – 30.5 33 – 25.7 34 – 21.7 35 – 18.1 36 – 15.2 37 – 12.8 38 – 10.8 39 – 9.03 40 – 7.62 41 – 6.42 42 – 5.42 43 – 4.52 44 – 3.81 45 – 3.21 46 – 2.71 47 – 2.26 48 – 1.90 49 – 1.60 50 – 1.35 51 – 1.13 52 – 0.95 53 – 0.80 |
| + | 1 reference(s) hidden. |
| Honeywell Field Solutions | TWM9000 | 0201 | Analog Input | Transducer |
| Description: | lfc threshold |
| Parent: | FILTER_C1_2 |
| Minimum Range: | 0 |
| Maximum Range: | 10 |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | low flow cutoff threshold process input (Fct. C1.2.10) |
| + | 1 reference(s) hidden. |
| Emerson Process Management | Rosemount 8742C | 0501 | Transducer |
| Description: | Low Flow Cutoff |
| Unit: | PRIMARY_VALUE_RANGE.UNITS_INDEX |
| Category: | Vendor |
| Access: | Engineer |
| Type: | 32 bit Float |
| Help: | When flow rate is less than this entered value (maximum value of 1 ft./sec.), flow rate output will be set to 0 flow. |